Get Latest Apr-2025 Conduct effective penetration tests using SurePassExams JN0-105 [Q43-Q65]

5/5 - (2 votes)

Get Latest [Apr-2025] Conduct effective penetration tests using SurePassExams JN0-105

Penetration testers simulate JN0-105 exam PDF

Juniper JN0-105 Exam Syllabus Topics:

Topic	Details
Topic 1	Operational Monitoring and Maintenance: Different methods of monitoring or maintaining Junos devices are identified in this topic. Lastly, it discusses monitoring or maintenance procedures for a Junos device.
Topic 2	User Interfaces: This topic delves into identifying the concepts, operation, or functionality of the Junos user interface.
Topic 3	Networking Fundamentals: The topic networking fundamentals covers identifying the concepts and functionality of different fundamental elements of networking.
Topic 4	Configuration Basics: Identification of the main elements for configuring Junos devices is discussed in this topic. Moreover, it describes configuring basic components of a Junos device
Topic 5	Junos OS Fundamentals: It covers concepts, benefits, and functionality of the core elements of the Junos OS.

NEW QUESTION 43
Which two statements are true about the PFE? (Choose two.)

The PFE implements various services such as policing, stateless firewall filtering, and class of service.

The PFE uses Layer 2 and Layer 3 forwarding tables to forward traffic toward its destination.

The PFE handles all processes that control the chassis components.

The PFE is responsible for performing protocol updates and system management.

NEW QUESTION 44
Which three benefits occur when operating an interior gateway protocol (IGP) in an autonomous system (AS)?
(Choose three.)

IGPs automatically distribute static routing information.

IGPs determine the optimal paths for data transmission.

IGPs learn prefixes in the global Internet’s routing table.

IGPs react very fast to network change.

IGPs learn everything about the subnets and best paths within your network.

NEW QUESTION 45
Which type of device uses the destination IP address to forward packets?

Layer 3 router

Layer 2 switch

repeater

hub

NEW QUESTION 46
What are two examples of exception traffic? (Choose two.)

transit packets

routing updates

log messages

ping to the local device

NEW QUESTION 47
Exhibit.

Referring to the exhibit, which routing configuration is required for these two users to access the remote server?

Users must connect directly to the router.

Users and the server require a default gateway.

Trunk ports must be enabled on the switch.

A routing protocol must be enabled on the router.

NEW QUESTION 48
What will the request system configuration rescue save command do?

It saves the most recently committed configuration as the rescue configuration.

It saves the candidate configuration as the rescue configuration.

It saves a configuration version prior to the configuration most recently committed as the rescue configuration.

It activates the rescue configuration.

NEW QUESTION 49
What is the maximum number of rollback configuration files that the Junos OS will store?

NEW QUESTION 50
You are creating a new policy to accept and redistribute routes into your IGP.
In this scenario, which match criteria would you use to identify the route prefixes to select?

instance

route-type

neighbor

route-filter

NEW QUESTION 51
Exhibit
user@router> show route 192.168.100.2
inet.O: 15 destinations, 17 routes (15 active, 0 holddown, 0 hidden) Limit/Threshold: 1048576/1048576 destinations
+ = Active Route, – = Last Active, * = Both 192.168.100.2/32 *[OSPF/IO] 00:14:29, metric 1
> to 172.16.1.6 via ge-0/0/1.0 [BGP/170] 00:06:49, localpref 100
AS path: 65102 I, validation-state: unverified > to 172.16.1.6 via ge-0/0/1.0 Referring to the exhibit, which statement is correct?

The BGP path is the only active route.

The BGP route is preferred over the OSPF route.

The OSPF path is the only active route.

/ Traffic is load-balanced across two routes.

NEW QUESTION 52
You want to redeploy a Junos device by clearing the existing configuration and resetting it to factory defaults.
In this scenario, which command would help to accomplish this task?

show system storage

request system storage cleanup

request system storage cleanup dry-run

request system zeroize media

NEW QUESTION 53
Which process in the Junos OS is responsible for device management tasks including the CLI and commit operations?

mgd

chassisd

rpd

dcd

NEW QUESTION 54
Click the Exhibit button.

How is traffic, sourced from 10.0.0.0/8, treated by the firewall filter shown in the exhibit?

logged and discarded

logged and rejected

logged with no further action

logged and accepted

NEW QUESTION 55
You have logged on to a Junos device and are at the operational mode prompt.
Which two commands are used at this prompt? (Choose two.)

show interface ge-0/0/0

request system shutdown

set interface ge-0/0/0 unit 0 family inet

run show interface terse

NEW QUESTION 56
A network administrator is attempting to route traffic on a Juniper switch to one of three different VLANs:
Prod, Test, and Dev. Each VLAN has been assigned a numerical value.
In this scenario, what are these numerical values called?

defaults

interfaces

names

tags

NEW QUESTION 57
Exhibit
{hold:node0}[edit]
root# set system root-authentication ?
Possible completions:
+ apply-groups Groups from which to inherit configuration data
+ apply-groups-except Don’t inherit configuration data from these groups
encrypted-password Encrypted password string
load-key-file File (URL) containing one or more ssh keys
plain-text-password Prompt for plain text password (autoencrypted)
> ssh-dsa Secure shell (ssh) DSA public key string
> ssh-rsa Secure shell (ssh) RSA public key string
{hold:node0}[edit]
root# set system root-authentication plain-text-password
New password:
Retype new password:
{hold:node0}[edit]
root# commit and-quit
[edit interfaces]
‘ge-0/0/0’
HA management port cannot be configured
error: configuration check-out failed
{hold:node0}[edit]
root#
You are unable to remotely access your Juniper device using the CLI.
Referring to the exhibit, which command would you add to the existing configuration to enable remote CLI access?

load factory-default

set system root-authentication plain-text-password

set system services ssh

set system login idle-timeout 20

NEW QUESTION 58
Which character is used to filter the command output in the Junos CLI?

NEW QUESTION 59
You want to redeploy a Junos device by clearing the existing configuration and resetting it to factory defaults.
In this scenario, which command would help to accomplish this task?

show system storage

request systemstorage cleanup

request systemstorage cleanup dry-run

request systemzeroize media

NEW QUESTION 60
Which prompt indicates that you are using configuration mode?

NEW QUESTION 61
You have just increased the MTU size of interface ge-0/0/0 and committed the configuration.
Which command would help you identify the applied MTU change?

monitor interface ge-0/0/0

monitor traffic interface ge-0/0/0

show interfaces ge-0/0/0 terse

show interfaces ge-0/0/0

NEW QUESTION 62
You configured your system authentication order using the set authentication-order tacplus radius password command.
Which statement is correct in this scenario?

A rejection by TACACS+ will prevent a login and bypass the other two authentication methods.

The password authentication will only be used if the TACACS+ and RADIUS servers fail to respond.

All authentication methods are used with the most restrictive permission set used.

The password authentication method is evaluated if the TACACS+ and RADIUS servers respond with a reject message.

NEW QUESTION 63
Which two statements describe the result when you enter? at the command-line prompt? (Choose two.)

It lists the available commands and options.

It lists tips for the help menu.

It displays help about a text string contained in a statement.

It displays summary information about the commands and options.

NEW QUESTION 64
How many rescue configuration files are supported on a Junos device?