[UPDATED 2024] Getting 156-836 Certification Made Easy! [Q23-Q37]

4.7/5 - (3 votes)

[UPDATED 2024] Getting 156-836 Certification Made Easy!

156-836 Exam Crack Test Engine Dumps Training With 77 Questions

The CheckPoint 156-836 exam is designed to test the candidates’ understanding of the advanced features of Check Point Maestro and to assess their ability to manage large-scale networks of security gateways. 156-836 exam covers topics such as the deployment and configuration of the Check Point Maestro solution, the management of security gateways, and the troubleshooting of issues related to the solution.

QUESTION 23
There is a Security group of 10 Appliances and all of them are up and running. How many Appliances within a Security Group keep the same connection in its connection table in case of NAT?

Between 2 and 4

All 10

QUESTION 24
There are two 10Gbps dual-port NIC installed on a 6800 appliance. Which interfaces should be connected to Orchestrator 1 for downlinks’ intra-orchestrator redundancy when using two Orchestrators?

Any pair of available ports

Port 1 in Slot 1 and Port 1 in Slot 2

Port 1 in Slot 1 and Port 2 in Slot 1

Port 1 in Slot 2 and Port 2 in Slot 1

QUESTION 25
Do all MHOs need to be upgraded before starting the SGM upgrades?

During the upgrade process all SGMs should be upgraded before upgrading all of the MHOs.

A minimum of one of the MHOs should be upgraded before starting the SGM upgrades. However, there is no requirement to upgrade all the SGMs during the same maintenance window as the MHO

All MHOs must first be upgraded before starting the SGM upgrades However, there is no requirement to upgrade all the SGMs during the same maintenance window as the MHOs.

MHOs do not need to be upgraded at all because Maestro supports the use of different versions between the MHOs and SGMs.

QUESTION 26
How does HyperSync work in a Dual Site environment?

Each active connection has two local backups (on the local site) and a third backup connection on the second site (remote site.)

Each active connection has a backup connection on the second site (remote site.)

Each active connection has a local backup (on the local site) and a second backup connection on the second site (remote site.)

Each active connection has a local backup (on the local site) and a second backup connection on each of the MHOs.

QUESTION 27
Which command do you use to find bottlenecks in the system that are affecting performance, even functionality in some cases?

asg stat -v

asg diag verify

asg perf -v

asg monitor

QUESTION 28
For the MHO-175, which ports are Management ports?

Ports 49 – 55 are Management ports.

Ports 1 – 4 are Management ports.

Ports 27 – 47 are Management ports.

Ports 5 – 26 are Management ports.

QUESTION 29
At a minimum, how many management and Uplink ports does a SG require?

Only one of the two interfaces is needed for the Security Group.

Neither are required.

Two of each.

One each.

QUESTION 30
What is the Correction Layer?

Correction Layer is a daemon which corrects errors on Backplane interfaces

Correction Layer is a mechanism which handles asymmetric connections in multi-appliance system. For example, in case of NAT

Correction Layer is a mechanism which activated in case of asymmetric routing

Correction Layer is a Layer of GAIA OS which corrects misspelled commands and allows them to execute

QUESTION 31
While looking at your system’s correction statistics, you notice you have a correction rate approaching 100 percent. Is this a problem?

A correction rate above 90 percent indicates a need to disable Layer 4 Distribution.

A correction rate approaching 100 percent of all connections is unusual. This is a cause for concern because the SGMs may fail to process traffic.

If correction rates are higher than 80 percent, latency is expected.

In some scenarios, a correction rate approaching 100 percent of all connections is not unusual. This is not usually a cause for concern as the correction mechanism is fast and efficient.

QUESTION 32
What happens if you apply a hotfix using gClish?

If you apply a hotfix using gclish, it causes an outage for the entire SG as all members reboot at roughly the same time.

If you apply a hotfix using gclish, each SG members installs the hotfix and reboots after waiting it’s turn to do so.

Logical groups “A” and “B” are created. Members of group “A” install and reboot first. Then members of group “B” does the same once reboots have finished with group “A.”

If you apply a hotfix using gclish, the operation will fail because an outage would occur.

QUESTION 33
What is one benefit of a Dual MHO environment?

Dual MHOs provide redundancy to the Maestro environment by increasing throughput by at least 50 percent.

Dual MHOs allow better synchronization to occur between SGMs.

Dual MHOs allow additional SGMs to be added to the SG.

Dual MHOs can be used to achieve increased scalability and redundancy.
.

QUESTION 34
Possibilities for a failure in a single SGM of a Security Group include.

A change was made with clish instead of gClish, causing the SGM to handle traffic differently than the other SGMs.

SecureXL is not enabled on the SGM.

An administrator imported a hotfix into the CPUSE repository of a single SGM.

There are too many active SGMs in the SG.

QUESTION 35
How many orchestrators may Dual-Site include?

2 or 4

Only 4

QUESTION 36
What is the maximum number of Appliances within Security group in Dual-Site configuration?

QUESTION 37
What cannot be learned from the output of asg monitor command?

Uptime

Port status

Security Policy status

Appliances cluster status

156-836 Exam Dumps Contains FREE Real Quesions from the Actual Exam: https://www.surepassexams.com/156-836-exam-bootcamp.html

Leave a Reply Cancel reply