HPE6-A81 Exam Dumps – Try Best HPE6-A81 Exam Questions from Training Expert SurePassExams [Q20-Q43]

Rate this post

HPE6-A81 Exam Dumps – Try Best HPE6-A81 Exam Questions from Training Expert SurePassExams

Practice Examples and Dumps & Tips for 2022 Latest HPE6-A81 Valid Tests Dumps

NEW QUESTION 20
Refer to the exhibit.

A customer has just configured a Posture Policy and the T 2 -Health check Service. Next they installed the OnGuard Agent on a test client connected to the Secure_Employee SSID. When they check Access Tracker they see many WEBAUTH requests are being triggered What could be the reason’

The OnGuard Agent trigger the events based on changing the Health Status.

The OnGuard Agent is connecting to the Data Port interface on ClearPass.

TCP port 6658 is not allowed between the client and the ClearPass server.

OnGuard Web-Based Health Check interval has been configured to three minutes.

NEW QUESTION 21
Under OnBoard Management and Control, which option will deny the user from re-enrolling one of his devices with Onboard?
View by Certificate >> Click on the device >> Delete certificate

Delete this client certificate View by Dev >> Click on the device

Manage Access >> Deny access to this device View by Certificate

Click on the device >> Revoke certificate >> Revoke this client certificate

View by Username >> Click on the user >> Delete Actions >> Delete all devices

NEW QUESTION 22
A customer has acquired another company that has its own Active Directory infrastructure. The 802 1X PEAP authentication works with the customer’s original Active Directory servers but the customer would like to authenticate users from the acquired company as well.
What steps are required, in regards to the Authentication Sources, in order to support this request? (Select two.)

Create a new Authentication Source, type Active Directory.

Create a new Authentication Source, type Generic LDAP.

Add the new AD server(s) as backup into the existing Authentication Source.

There is no need to join ClearPass to the new AD domain.

Join the ClearPass server(s) to the new AD domain.

NEW QUESTION 23
Refer to the exhibit.

What could be causing the error message received on the OnGuard client?

The Service Selection Rules for the service are not configured correctly

The Health-Check service does not have Posture Compliance option enabled

The client’s OnGuard Agent has not been configured with the correct Policy Manager Zone.

There is a firewall policy not allowing the OnGuard Agent to connect to ClearPass

NEW QUESTION 24
Refer to the exhibit.

You have integrated the Cisco switch with ClearPass to do MAC-Auth for Cisco IP Phones. The phones connect to the network successfully but when you try to change the status of the device from the access tracker, you see only the ArubaOS Radius terminate session options and not the Cisco vendor terminate session options. What will you check to fix this issue?

Verify if the ClearPass supports RADIUS Dynamic Authorization for the Cisco IP Phones doing MAC.AUTH.

Verify if the Cisco IP Phone is actively connected to the switch to get the Cisco CoA options from ClearPass.

Verify if the Enable RADIUS Dynamic Authorization option is checked for the Cisco switch added under the network devices.

Verify that Cisco is chosen as the vendor name while adding the Cisco Switch under network devices.

NEW QUESTION 25
Which statements art true about Aruba down loadable user roles? (select three)

Administering downloadable user roles can be difficult for a large enterprise.

Can be applied only on ports or WLAN users authenticated by ClearPass.

Can use these result for other authentication methods not involving ClearPass.

Aruba downloadable user role are universally available across the environment.

Aruba downloadable user role is a built in enforcement template in ClearPass.

Downloadable role names must be defined in Aruba switch or controller.

NEW QUESTION 26
What is the Secure SSIO (otherwise referred to as Single SSID) OnBoard deployment service workflow?

Onboard Provisioning RADIUS service, Onboard Authorization Application service, Onboard Pre-Auth Application service. Onboard Provisioning RADIUS service Onboard Provisioning RADIUS service,

Onboard Authorization RADIUS service. Onboard Pre-Auth Application service. Onboard Provisioning RADIUS service Onboard Provisioning RADIUS service. Onboard Prt-Auth Application service.

Onboard Authorization Application service. Onboard Provisioning RADIUS service Onboard

Provisioning RADIUS service. Onboard Pre-Auth RADIUS service. Onboard Authorization Application service. Onboard Provisioning RADIUS service.

NEW QUESTION 27
Refer to the exhibit.

You have set up a home lab for ACCX exam preparation with Aruba Clear Pass integrated with Aruba Controller and Instant Access Point Guest Mac Caching functionality is configured only for Aruba Controller’s guest SSID and a common Web Login page is configured for both NAD devices You tested and verified the mac caching functionality for a client by connecting it to the Aruba Controller’s guest SSID.
What will happen when you disconnect the client from Aruba Controller’s guest SSID and connect it to Instant APs guest SSID?

The client will bypass the captive portal authentication by completing the MAC authentication.

The client will fail the mac authentication and will be redirected to the captive portal page.

The client does not have to complete any authentication as the re-connection was immediate.

The client will be redirected to the captive portal page to complete the web authentication.

NEW QUESTION 28
Refer to the exhibit.

You configured the Wired MAC – Auth service enforcement conditions with the Endpoint profiling data When mac-auth based clients connect to the network, ClearPass assigns Deny access profile. The customer has sent you the above screenshots How would you resolve the issue?

Change the Rules evaluation algorithm in the Enforcement policy of HPE ArubaOS Mac auth policy as “select all matches” and add the CoA action as HPE Bounce switch port in the profiler tab.

Create a new condition in last position with Type and operator as Tips:Role EQUALS [User Authenticated] with action as Allow access profile permitting any services and any ports to do profiling.

Create a new condition in first position with Type and operator as Authorization (Endpoint Repository]:Category NOT_EXISTS with action as Limited access profile allowing only DHCP service.

Create a new condition in the first position with Type and operator as Authorization [Endpoint Repository] Category NOT_EXISTS with action as Limited access profile and ArubaOS wireless terminate session

NEW QUESTION 29
Refer to the exhibit.

What enforcement profile will be assigned to a client who has successfully completed the user and machine authentication with UNKNOWN posture token?

Redirect to Aruba OnBoard Portal

Redirect to Aruba Quarantine Profile

Redirect to Aruba Dissolvable_page Profile

Deny Access Profile

NEW QUESTION 30
Refer to the exhibit.

The users connecting to a wireless SSIO “secure-HS-5007” were being processed by an incorrect 802.1 X service created for VIP access and the user gets deny access. The customer has sent you the screenshot to get your support to resolve the issue What changes will you suggest to fix it?

To the HS_Building 802.1 X service, add another service rule condition with VIP access Aruba-Essid-Name and leave it in same position

In the HS_Building 802.1X service, remove the service rule condition with Aruba controller location name and leave it in same position

Delete the HSBuilding 802 IX service, odd VIP access Aruba-Essid-Name as fourth condition to WSBuilding Aruba 802 1X service

In the HSBuilding 802. IXservice. change the Authentication method for AMCAuth for VIP access and leave it in same position

NEW QUESTION 31
A customer has created a Guest Self-Registration page that they would like to use it as ‘template’ for all the new pages that are going to be created from now on. Their goal is to ensure that the header and footer on every page are the same, and any edits made to them are automatically reflected on every Self-Registration Page.
What should be configured in order to accomplish this request?

Save the “template” page as Master Self’Registration page.

Copy the “template” page and edit it each time a new Self-Registration Page is needed.

Create child pages when creating new Self-Registration pages and select the “template” as Parent.

Save this “template” page as a new Skin to be used on other Self-Registration pages.

NEW QUESTION 32
A customer has a Clear Pass cluster deployment with four servers, two servers at the data center and two servers at a large remote site connected over an SO-WAN solution. The customer would like to implement OnGuard. Guest Self-Registration, and 802.1 X authentication across their entire environment. During testing the customer is complaining that users connecting to an Instant Cluster Employee S5ID at the remote site, with the OnGuard Persistent Agent installed are randomly getting their health check missed.
What could be a possible cause of this behavior?

The traffic on the TCP port 6658 is congested due to the fact that this port is also used by the IPSec keep-alive packets of the SO-WAN solution.

The OnGuard Clients are automatically mapped to the Policy Manager Zone based on their IP range but an ACL on the switch could be blocking access.

The Aruba-user-role received by the IAP is filtering the TCP port 6658 to the Clear Pass servers and after 10 seconds the SSL fallback gets activated and randomly generates the issue

The ClearPass Policy Manager zones have been defined but the local IP subnets have not but properly mapped to the zones and the OnGuard Agent might connect to any of the servers in the cluster.

NEW QUESTION 33
You have configured a factory default Aruba controller with Clear Pass for guest access and the NAS vendor settings – Address field in the guest weblogin page is configured with Aruba controller’s default self-signed certificate common name “securelogin.arubanetworks.com” that the client will use to submit the authentication request.
What happens when the client sends a DNS request to securelogin aruba networks com?

The controller will intercept the ONS request sent to its HTTPS certificate common name and return its own IP address.

Address field in the web login vendor settings should be set to IP address of the controller instead of certificate CN name.

Client does not send the DNS request, the ClearPass resolves the hostname in the NAS vendor settings Address field.

The controller will pass the request to the DNS server and server returns the IP of the controller from the DNS records.

NEW QUESTION 34
Refer to the exhibit.

A customer hat configured the Aruba Controller for administrative authentication using ClearPass as A TACAC5 serve’ During tasting, the read-only user is getting the root access role What could be a possible reason for this behavior? (Select two.)

The read-only enforcement profile is mapped to the root role

The ClearPass user role associated to the read-only user is wrong.

On the Controller, the TACACS authentication server is not configured for Session authorization

The Controller’s Admin Authentication Options Default role is mapped to root

The Controller Sarver Group Hatch Rules are changing the user role.

NEW QUESTION 35
Your customer has recently implemented a seIf-registration portal in ClearPass Guest to be used on a Guest SSID broadcast from an Aruba controller Your customer has started complaining that the users are not able to reliably access the Internet after clicking the login button on the receipt page They tell you that the users will click the login button multiple times and after about a minute they gam access.
What could be causing this issue?

The enforcement profile on ClearPass is set up with an IETF:session delay.

The self-registration page is configured with a 1 minute login delay.

The guest users are assigned a firewall user role that has a rate limit.

The guest users are assigned multiple DNS servers delaying DNS response.

NEW QUESTION 36
Refer to the exhibit.

What enforcement prof lit will be assigned to the Windows 10 MDH enabled devices if it completes user authentication and is already profiled by ClearPess?

Cisco Full Access VLAN

Default – Deny Access Profile

Cisco Redirect ACL for profiling

Cisco Redirect URL – Service Unavailable

NEW QUESTION 37
What is used to validate the EAP Certificate? (Select two.)

Key usage

Date

Server Identity

SAN entries

Common Name

NEW QUESTION 38
A customer is planning to implement machine and user authentication on infrastructure with one Aruba Controller and a single ClearPass Server. What should the customer consider while designing this solution? (Select three.)

The customer does not need to worry about Multi-Master Catht Survivability because the Controller will also cache the machine state.

The Windows User must log off. restart or disconnect their machine to initiate a machine authentication before the cache expires.

The machine authentication status rs written in the Multi-master cache on the ClearPass Server for 24 hrs

The Customer should enable Multi-Master Cache Survivability as the Aruba Controller will not cache the machine state.

Machine Authentication only uses EAP TLS. as such a PKI infrastructure should be in place for machine authentication.

Onboard must be used to install the Certificates on the personal devices to do the user and machine authentication

NEW QUESTION 39
You art deploying Cleat Pass Policy Manager with Guest functionality for a customer with multiple Aruba Networks Mobility Controllers. The customer wants to avoid SSL errors during guest access but due to company security policy cannot use a wildcard certificate on ClearPass or the Controllers.
What is the most efficient way to configure the customer’s guest solution? (Select two.)

Install the same public certificate on all Controllers with the common name “controller.{company domain)

Build multiple Web Login pages with vendor settings configured for each controller

Build one Web Login page with vendor settings for captiveportal-controller (company domain)

Build one Web Login page with vendor settings for controller (company domain)

Install multiple public certificates with a different Common Name on each controller

NEW QUESTION 40
The customer has configured the guest self-registration with sponsor approval. The guest users that the sponsor email and the other requested details while registering the account but the users were able to complete the authentication and access the internet without the sponsor’s approval.
What configuration settings will you check to make this setup work?

Check if sponsor name field is enabled in the register form page

Check if sponsor email field is enabled in the register form page

Check if authentication option n is enabled in the self-registration page enabled.

Check if sponsor confirmation is enabled in the self-registration page

NEW QUESTION 41
Refer to the exhibit.

A customer it troubleshooting a client not getting the SHV posture updated and the OnGuard agent shows the Health Status Not Known. What could the user do to update the health status?

connect using an interface that is configured as Managed Interface

reinstall the OnGuard agent from the Wired interface

change the Policy Manager Zone mapping and add the WIRED interface range

modify the agent.conf file and add the WIRED interface to it

NEW QUESTION 42
Refer to the exhibit.

A customer with multiple Aruba Controllers has just installed a new certificate for “‘.customerdomain.com- on all Aruba Controllers While testing the existing guest Self-Registration page the customer noticed that the logins are failing While troubleshooting they are finding no entries in the Event Viewer or Access Tracker for the tests Suspecting that the Aruba Controllers may not be properly posting the credentials from the guest browser, they open the NAS Vendor Settings for the Guest Self-Registration Page.

Add PTR records on the DNS server for “securelogin arubanetworks.com”.

Change the “Secure Login’ field to “Use Vendor Default”.

Change the ‘IP Address field to” securelogin.customerdomain.com

Change the “IP Address field to “captiveportal-login.customerdomain.com”.

NEW QUESTION 43
Refer to the exhibit.

The customer configured a guest operator access by creating a custom operator profile and the built-in universal ClearPass profile mapping translation rule. When he tests the setup, he gets authentication failed. Using the streenshots sent by the customer as a reference, what would suggest to the customer to fix the issue?