[Q20-Q39] Real EMC D-PE-OE-23 Exam Questions [Updated 2025]

Rate this post

Real EMC D-PE-OE-23 Exam Questions [Updated 2025]

D-PE-OE-23 Exam Dumps Pass with Updated 2025 Dell PowerEdge Operate 2023

EMC D-PE-OE-23 Exam Syllabus Topics:

Topic	Details
Topic 1	Server Portfolio and Features: This section of the exam measures the skills of Dell System Administrators and Dell Technical Support Engineers and covers the definitions of chassis form factors and their numbering systems.
Topic 2	Server Management and Configuration Tools: This section of the exam measures the skills of Dell Technical Support Engineers and covers the functions of iDRAC, including login procedures and connection methods. It explains various management interface options like LCC and racadm, as well as in-band and out-of-band management techniques.
Topic 3	System Administration: This section of the exam measures the skills of Dell System Administrators and covers verifying health status and managing iDRAC licenses.
Topic 4	Server Components: This section of the exam measures the skills of Dell System Administrators and covers various server components, including processors, memory options, and configurations. It also addresses power options, redundancy features, thermal management, and liquid cooling systems.
Topic 5	Server Troubleshooting: This section of the exam measures the skills of Dell Technical Support Engineers and covers analyzing visual indicators on server components such as system IDs and power supply units.

NEW QUESTION 20
SPECIAL INSTRUCTIONS
The remaining Part1 questions are associated with four case studies that describe various environments or settings. Each case study appears on its own display screen. Questions for each case study will appear on separate display screens. When displaying a question, you can easily review the related case study by clicking on the ‘Review Case Study icon shown below:
Case Study 5 – Refer to the Exhibit.

Backing up data from a Dell EMC Isilon cluster exceeds the company’s backup window. Because the company has a large amount of data with a continuous high growth rate, they want to change their backup strategy. The Gen 6 Isilon cluster consists of 24 nodes.
Their current backup strategy is an NDMP three-way backup performing weekly full backups to tape and incremental backups each night. The strategy uses Dell EMC Net Worker. The DMA uses Include paths to specify what data to backup. All data on the cluster must remain accessible.
The company’s IT team is now looking for a new data protection strategy.
The company wants to:
– Minimize the backup window
– Increase the speed of data recovery
– Reduce the network traffic
– Reduce the overall growth of the backup datasets
The IT Team indicates that their currently backup hardware will be used in any solution.
Which solution meets their requirements?

Implement an incremental forever backup strategy

Configure the DMA to use IPv6 for better performance

Change the backup strategy to token-based backups

Increase the backup tape block size to 512 KB

NEW QUESTION 21
A company needs a server that meets these requirements:
– Support workloads that are accelerated and computational-heavy
– Has cyber resilient architecture and Root of Trust
– Supports HPR fans
– Supports OCP 3.0 technology
Which Dell PowerEdge server model meets these requirements?

R960

XE9680

MX760c

NEW QUESTION 22
A system board has been replaced on a Dell PowerEdge 16G server. What data can Easy Restore recover?

Service Tag

HBA configuration

PERC configuration

Lifecycle controller log

NEW QUESTION 23
How can a technician know whether IDRAC9 System Lockdown mode is enabled?

Lockdown activation message in red box in the iDRAC web GUI Access to LCC is disabled when the server boots

Lockdown activation message in yellow box in the iDRAC web GUI Access to LCC is disabled when the server boots

Lockdown activation message in red box in the iDRAC web GUI Access to LCC requires a password when the server boots

Lockdown activation message in yellow box in the iDRAC web GUI Access to LCC requires a password when the server boots

NEW QUESTION 24
Which tool provides automated Dell support case creation?

SupportAssist Collector

OpenManage Case Creator

OpenManage Server Administrator

SupportAssist for IDRAC / Enterprise systems

NEW QUESTION 25
An engineer wants to fully leverage Microsoft Windows Server 2016 for TPM-based guarded host deployment of a 14G server.
Which BIOS settings need to be used for installing the Windows server?

Option A

Option B

Option C

Option D

NEW QUESTION 26
Which sections are included in the iDRAC Troubleshooting tab?

Post Code, Diagnostics, and Video capture

Diagnostics, Last crash screen, and Post Code

Video capture, Post Code, and Last crash screen

Last crash screen, Video capture, and, Diagnostics

NEW QUESTION 27
A technician installs OpenManage Server Administrator (OMSA) on a server.
Which two address options should be used to access OMSA remotely using a web browser? (Choose three)

https://IP address: 2607

https://IP address: 1311

https://hostname: 2607

https://hostname: 1311

https://IP address: 80

https://IP address: 443

NEW QUESTION 28
What is the purpose of the Silicon-Based Hardware Root of Trust feature in Dell EMC PowerEdge
14G servers?

Ensures that the installed operating system is authentic

Ensures that the server has a valid Service Tag number

Ensures that no unauthorized BIOS or firmware codes are run

Ensures that the server boots only when connected to a verified network

NEW QUESTION 29
A technician has just upgraded memory modules in a server. When the technician loads the iDRAC, the new memory is NOT listed. The OS reports all memory.
Where should the technician troubleshoot this issue?

Boot to F2, select iDRAC Settings > Lifecycle Controller. If enabled, disable “Collect System Inventory on Restart”. Restart the system, then return to the menu and enable it again.

Boot to F2, select System BIOS > Memory Settings, and enable System Memory Testing

Boot to F2, select System BIOS > Integrated Devices. If enabled, disable “Collect System Inventory on Restart”. Restart the system, then return to the menu and enable it again.

Boot to F2, select iDRAC Settings > Memory Settings, and make sure Memory Operation Mode is Mirrored.

NEW QUESTION 30
Which two models are 16th generation PowerEdge rack servers?(Select 2)

R650

MX760C

R760

C6620

XE9680

NEW QUESTION 31
A technician needs to analyze a server that is using more power than expected. The server is part of a cluster that runs jobs between 8 AM and 5 PM. The cluster is not used at other times of the day. The server runs an unsupported OS. Performance while jobs are running is a key consideration.
Which option should the technician choose from within System Profile Settings within System Setup to address this issue?

Dense Configuration

Performance Per Watt (DAPC)

Performance

Performance Per Watt (OS)

NEW QUESTION 32
How can a system administrator compare the currently installed hardware to the original system configuration?

Pull a SupportAssist Collection Comparison Report

Restore the original System Profile

View Factory Shipped Inventory

Export a Tech Support Report

NEW QUESTION 33
Which iDRAC feature allows users to view video recordings of the last three power cycles?

Diagnostics

Virtual Console

System debug logs

Boot and Crash Capture

NEW QUESTION 34
A user has a fully configured PowerEdge R640 and an iSM installed on their Windows. 2016 operating system. They now want to install OMSA to enable them to have alerts sent out In-Band to a management console.
What does the user need to consider?

OMSA can be installed on the same operating system with ISM. Provided both OMSA have iSM have the same firmware version revisions

iSM must be uninstalled before OMSA is installed

iSM must be disabled before OMSA can be installed

OMSA can be installed on the same operating system with iSM without restrictions

NEW QUESTION 35
After completing a disk rebuild operation, a technician needs to configure the system so that the rebuild process happens faster the expense of slowing users down.
Which setting should be changed?

Rebuild Rate in the BIOS settings

System Profile to Performance in the BIOS settings

System Profile to Performance in the iDRAC GUI

Rebuild Rate in the iDRAC GUI

NEW QUESTION 36
A technician is changing the iDRAC IP address from the static IP address 10.37.125.88 to DHCP on the technician’s PowerEdge R640 that does not have a front LCD. After completing this task, they are unable to determine which IP address was given to the iDRAC and they cannot reboot the server.
What method could the technician use to determine what IP address is assigned to the iDRAC?

Use the iDRAC Direct feature. Access iDRAC web GUI and determine the assigned IP address

Plug a monitor or KVM into the system. Reboot the server to view the assigned IP iDRAC address on the Dell boot up splash screen

Hold the system identification button down for more than 3 seconds to reset it back to the default static address 192.168.0.120

NEW QUESTION 37
The Dell PowerEdge R660 sei /ei is not responding during POST.
What can the system administrator do to enter BIOS progress mode?

Press and hold the power button for 15 seconds.

Enter <F2> when the server tries to POST.

Press and hold the System ID button for more than five seconds.

Disconnect and reconnect the power cables for both PSUs.

NEW QUESTION 38
A technician resets the iDRAC but when they attempt to log back in to the iDRAC is offline.
Why is the iDRAC offline?

DRAC has reset to the default IP address of 192.168.0.120

Technician must use iDRAC Direct to enable the iDRAC network

iDRAC is still in the reset process

Technician must move the iDRAC network cable back to the iDRAC dedicated NIC

NEW QUESTION 39
A company is implementing Superna Eyeglass to automate and orchestrate SyncIQ failover and failback.
What is one of the requirements when implementing Superna Eyeglass for a Dell EMC Isilon cluster?

Dedicated IP pool must exist

Administrator account must be used

Dedicated subnet must exist

System Access zone must be used