Q161. SIMULATION
You have been tasked with setting up a wireless network in an office. The network will consist of 3 Access Points and a single switch. The network must meet the following parameters:
The SSIDs need to be configured as CorpNet with a key of S3cr3t!
The wireless signals should not interfere with each other
The subnet the Access Points and switch are on should only support 30 devices maximum The Access Points should be configured to only support TKIP clients at a maximum speed INSTRUCTONS Click on the wireless devices and review their information and adjust the settings of the access points to meet the given requirements.
If at any time you would like to bring back the initial state of the simulation, please click the Reset All button.

Q162. Which of the following would be the MOST likely attack used to bypass an access control vestibule?

Q163. A small, family-run business uses a single SOHO router to provide Internet and WiFi to its employees At the start of a new week, employees come in and find their usual WiFi network is no longer available, and there is a new wireless network to which they cannot connect. Given that information, which of the following should have been done to avoid this situation’

Q164. A client who shares office space and an IT closet with another company recently reported connectivity issues throughout the network. Multiple third-party vendors regularly perform on-site maintenance in the shared IT closet. Which of the following security techniques would BEST secure the physical networking equipment?

Q165. A network technician receives a report from the server team that a server’s network connection is not working correctly. The server team confirms the server is operating correctly except for the network connection. The technician checks the switchport connected to the server and reviews the following data;

Which of the following should the network technician perform to correct the issue?

Q166. Which of the following VPN configurations should be used to separate Internet and corporate traffic?

Q167. A network technician is performing tests on a potentially faulty network card that is installed in a server. Which of the following addresses will MOST likely be used during traffic diagnostic tests?

Q168. Which of the following policies is MOST commonly used for guest captive portals?

Q169. A technician is investigating an issue with connectivity at customer’s location. The technician confirms that users can access resources locally but not over the internet The technician theorizes that the local router has failed and investigates further. The technician’s testing results show that the route is functional: however, users still are unable to reach resources on the internal. Which of the following describes what the technician should do NEXT?

Q170. A network is experiencing a number of CRC errors during normal network communication. At which of the following layers of the OSI model will the administrator MOST likely start to troubleshoot?

Q171. Users are reporting poor wireless performance in some areas of an industrial plant The wireless controller is measuring a tow EIRP value compared to me recommendations noted on me most recent site survey. Which of the following should be verified or replaced for the EIRP value to meet the site survey’s specifications? (Select TWO).

Q172. A user from a remote office is reporting slow file transfers. Which of the following tools will an engineer MOST likely use to get detailed measurement data?

Q173. Which of the following technologies are certificates most commonly associated with?

Q174. Which of the following has the capability to centrally manage configuration, logging, and firmware versioning for distributed devices?

Q175. A network engineer receives the following when connecting to a switch to configure a port:

Which of the following is the MOST likely cause for the failure?

Q176. A network technician is attempting to increase throughput by configuring link port aggregation between a Gigabit Ethernet distribution switch and a Fast Ethernet access switch. Which of the following is the BEST choice concerning speed and duplex for all interfaces that are participating in the link aggregation?

Q177. A network technician receives a report about a performance issue on a client PC that is connected to port 1/3 on a network switch. The technician observes the following configuration output from the switch:

Which of the following is a cause of the issue on port 1/3?

Q178. A security administrator is trying to prevent incorrect IP addresses from being assigned to clients on the network. Which of the following would MOST likely prevent this and allow the network to continue to operate?