1z0-1066-22 Premium Files Updated Oct-2023 Practice Valid Exam Dumps Question [Q59-Q81]

Rate this post

1z0-1066-22 Premium Files Updated Oct-2023 Practice Valid Exam Dumps Question

Practice with 1z0-1066-22 Dumps for Supply Chain Planning Cloud Certified Exam Questions & Answer

Oracle Planning and Collaboration Cloud 2022 Implementation Professional certification exam is designed to validate the candidate’s knowledge and skills in implementing Oracle Planning and Collaboration Cloud 2022. 1z0-1066-22 exam covers a wide range of topics, including configuring and administering Oracle Planning and Collaboration Cloud 2022, managing users and security, creating and managing planning models, and integrating Oracle Planning and Collaboration Cloud 2022 with other systems.

To pass the Oracle 1z0-1066-22 certification exam, candidates must demonstrate their ability to use Oracle Planning and Collaboration Cloud to improve business processes and increase productivity. 1z0-1066-22 exam consists of multiple-choice questions and requires a score of at least 65% to pass. Candidates have 120 minutes to complete the exam, and they can take it at any Pearson VUE testing center or online. Upon passing the exam, candidates will receive an Oracle Certification that validates their knowledge and skills in implementing Oracle Planning and Collaboration Cloud 2022.

QUESTION 59
Which two statements are true when using Measure catalogs? (Choose two.)

The predefined measure catalog is not the system default.

The measure catalog has a collection of measures that you can enable for use in a single plan in the Planning Central work area.

You can restrict access to Measure Catalogs using Administer Data Security.

You can add or remove measures from a measure catalog.

Measure catalogs are defined in the system to improve the performance of the plan.

You navigate to Configure Measure Catalogs to edit the Catalog.

QUESTION 60
You are setting up the plan page layout for your customer.
In which of these requirements would you use an Infotile?

Showing customer demand trend over a specific time period

Showing inventory values by product category

Showing a breakdown of exception in a pie chart

Showing on-hand value compared to targets

Showing inventory value across time

QUESTION 61
Which statement order is NOT true about how to effectively address demand at risk?

Recommendations appear in one of these five categories (or tabs): Expedite Buy Orders. Expedite Planned Orders. Expedite Transfer Orders. Add Resource Availability, and Add Supplier Capacity.

When you accept an expedite recommendation, the order is firmed by using the expedite date as the firm date. So when the plan is run after accepting the recommendation, the planning process assumes the supply is available on the firm date.

Be aware that recommendations to expedite buy orders not only include purchase orders and requisitions, but also planned buy orders.

To maximize effort, use the Recommendations Summary graph and aim for a low number of recommendations with the associated at-risk demand value substantial enough to make a difference in demand fulfillment percentage.

QUESTION 62
Another planner has previously created a supply plan, but you now need to make some changes so that you can do some ‘what-if’ analysis. How can you go about duplicating this plan?

You cannot duplicate plans. You must create a completely new supply plan.

Manage Plans > Search and select supply plan > Actions > Duplicate.

Run process “Duplicate supply plans” with existing plan as parameter.

Manage Plans > Search and select supply plan > Actions > Edit Plan Options > Select Copy.

You cannot duplicate a plan that is not owned by you.

QUESTION 63
As a new planner, you want to test simulation set functionality. You have created a simulation set named ‘Test Simulation Set.’ In this simulation set, you have already added Item 98573. You would like to change the item specification ‘Fixed Order Quantity’ to 10 within this simulation set.
Which sequence will allow you to accomplish this task?

Select and open ‘Test Simulation Set’ > Search and select Item 98573 > Highlight item > Select ‘Action’ > Select ‘Edit’ > Find Fixed Order Quantity specification> under the ‘Action’ column select ‘set value as’ > under the ‘Value’ column enter 10

Select and open ‘Test Simulation Set’ > Search and select Item 98573 > Highlight item > Select ‘View’ > Select ‘Columns’ > Check box next to Fixed Order Quantity specification> the ‘Fixed Order Quantity’ will now show on the Item 98573 line > Highlight line for Item 98573 and scroll right until you find ‘Fixed Order Quantity’ > Change value to 10

Select and open ‘Test Simulation Set’ > Search and select Item 98573 > Highlight item > Select ‘Action’ > Select ‘Edit’ > Find Fixed Order Quantity specification> under the ‘Action’ column select ‘reset to original’ > under the ‘Value’ column enter 10

Select and open ‘Test Simulation Set’ > Search and select Item 98573 > Highlight line for Item 98573 and scroll right until you find ‘Fixed Order Quantity’ > Change value to 10

QUESTION 64
Which option outlines changes you can make to a simulation plan when evaluating demand and supply?

Change item specification values, change item lead times, create mass changes for items

Add demands, cancel demands, reschedule demands, add supply, cancel supply, reschedule supplies

Change item specification values, change item lead times, change item-organization specification values

Add demands, cancel demands, reschedule demands, add new planned orders, reschedule supplies

Change item specification values, change item lead times, create mass changes for items all at once, change item-organization specification values

QUESTION 65
A major distributor experiences difficulty in establishing an inventory replenishment methodology. Which segmentation approach is not possible with Replenishment Planning?

to group items based on item attributes for the product and customer dimensions and then assign a replenishment policy to each group

to group items based on user-defined attributes and then assign a replenishment policy to each group

to group items based on similar global consumption levels and then assign a replenishment policy to each group

to group items based on similar consumption levels by warehouse and then assign a replenishment policy to each group

QUESTION 66
Which calendar is supported in the supply planning process but does not support bucketing by week?

Lunisolar

Fiscal

Roman

Gregorian

Julian

QUESTION 67
During an implementation, customer is in the process of planning supply requirements. Customer also needs to generate forecast and safety stock levels. Which plan type on the plan options should the customer be running?

Demand and Supply Plan

Safety Stock and Forecast Plan

Demand Plan

Supply Plan

Integrated Plan

QUESTION 68
Your customer has loaded shipment history of 1/1/14 through 12/31/16 and wants to generate a monthly forecast of 1/1/17 through 12/31/17 based on two-year shipment history.
When creating a demand plan, which two plan scopes and demand plan options should your customer use? (Choose two.)

For demand plan option, add forecast shipments as forecasting profile, enter history start date as 1/1/15, enter history end date as 12/31/15, and enter forecast start date as 1/1/17.

For demand plan option, add forecast shipments as forecasting profile, and enter historical buckets as 24.

For demand plan option, add forecast shipments as forecasting profile, enter history start date as 1/1/15, forecast start date as 1/1/17, and enter forecast end date as 12/31/17.

For demand plan option, add forecast shipments as forecasting profile, enter historical buckets as 24, and enter forecast buckets as 12.

For plan scope, select plan horizon days as 365, forecasting calendar as Gregorian, and forecasting time level as month.

For plan scope, select plan horizon as 12 months, forecasting calendar as Gregorian, and forecasting time level as month.

QUESTION 69
As the planner, you have made some changes to a few of the specifications for items in your simulation sets. You would like to run one of your existing Demand and Supply Plans that contains this simulation set to see how these changes impact the plan.
Which option shows the steps you must complete in order to ensure that when you run your existing Demand and Supply plan, it contains your changes to the simulation set?

When the Demand and Supply Plan is run, verify that ‘Recalculate Safety Stock’ is selected in the Details section.

You are only able to update one item attribute at a time. Since you have changed multiple attributes, you will be unable to update and run this plan.

When the Demand and Supply Plan is run, verify that ‘Refresh with current data’ is selected in the Details section.

No additional steps are necessary. Any plans that contain your simulation set will automatically be updated with the changes.

QUESTION 70
You want to check how many items have excess inventory. Where must you go in Planning Central to find this information?

Open Table, Graph, or Tile Set > Search Exceptions > Open > Expand Supply Planning Exceptions > Select Item with Excess Inventory

Manage Plans > Edit Demand and Supply Plan > Select Supply tab > Navigate to Item area > Filter by Items with Excess Inventory

Manage Plans > Edit Supply Plan > Select Supply tab > Navigate to Item area > Filter by Items with Excess Inventory

Configure Exceptions > Expand Supply Planning Exceptions > Select Item With Excess Inventory

Configure Exceptions > Expand Demand Planning Exceptions > Select Item With Excess Inventory

QUESTION 71
Which two statements are true about Planning Security? (Choose two.)

If a plan is set up as private, there is no way to further limit what users see within the plan.

If a plan is set up as public, there is a way to further limit what users see within the plan.

Data access sets can be used to limit what a planner can see. based on Items, Organizations, Carriers, Suppliers, and Customers.

A plan can be set up to be public or private.

QUESTION 72
Which two statements are true about Production Scheduling? (Choose two.)

Schedule options include: Configure Scope. Parameters, and View Settings.

Releasing a schedule can update Manufacturing Cloud work orders with revised dates, resources, release status, and work definitions.

Refreshing a Production Schedule means that the schedule is being recalculated.

A resource’s constraint mode has two choices: Relaxed and Constrained.

If a work order is not firm. Production Scheduling may schedule with an alternate resource.

QUESTION 73
Your Procurement Department is getting ready to set up Approved Supplier Lists that will be needed for Supply Planning. They ask you for what you need on the ASLs for planning usage. Which three options are key for planning? (Choose three.)

Make sure to include Maximum Order Quantities.

Make sure to include Minimum Order Quantities.

Make sure to include Fixed Lot Multipliers.

Make sure to include Fixed Order Quantities.

Make sure they are at a Global level.

Make sure all Local level ASLs include an Organization.

QUESTION 74
Your client manufactures consumer electronics and has all facilities live on Oracle Cloud. Their latest product has a very complicated manufacturing process and therefore can only be made at one facility (Organization ABC). However, it is ordered all over the world.
How should the Sourcing Rule be set up to accomplish this?

A global sourcing rule for 50% make at ABC and 50% buy from ABC

A local sourcing rule for 100% make at ABC; a global sourcing rule for 100% transfer from ABC

A local sourcing rule for 100% make at ABC; a global sourcing rule for 100% buy from ABC

A local sourcing rule for 100% buy from ABC; a global sourcing rule for 100% transfer from ABC

A global sourcing rule for 100% make at ABC; a local sourcing rule for 100% transfer from ABC

QUESTION 75
How can you deliver a forecast for drop shipments?

It cannot be done at this time.

Generate manually using Planning Analytics

Excel upload using File Based Data Import Process

Create based on the supplier performance for drop shipment collection

Create based on the drop shipment or booking history; the ship from will be the drop ship validation organization

QUESTION 76
Your client has reviewed all of the current graphs available for the plans, but cannot find one that shows them exactly what they want for the Days of Supply. How can this key performance indicator be added?

Go to Configure Planning Analytics > Actions > Manage Tables, Graphs, and Analysis Sets, and edit the current ‘Days of Supply’ graph to meet the client needs.

Go to Configure Planning Analytics > Actions > Manage Tables, Graphs, and Analysis Sets, and add a new graph with the requested data.

Open the plan and go to Actions > Manage Tables, Graphs, and Analysis Sets, and edit the current ‘Days of Supply’ graph to meet the client needs.

It is not possible to add new or change the current graphs.

Open the plan and go to Actions > Manage Tables, Graphs, and Analysis Sets, and add a new graph with the requested data.

QUESTION 77
Which list of parameters is available for selection when you run the Start Backlog Planning scheduled process?

Priority Rule. Organization. Demand Class, Item. Customer

Demand Priority Rule. Organization. Demand Class. Item. Customer

Backlog Priority Rule. Organization. Category. Item. Customer

Demand Priority Rule. Organization. Category. Item, Customer

QUESTION 78
When analyzing demand fulfillment, what are the three types of recommendations that users can review and accept for expediting? (Choose three.)

Expedite transfer orders

Expedite make orders

Expedite buy orders

Expedite drop ship orders

Expedite make to stock orders

QUESTION 79
You have executed Planning Data Collection and want to confirm that data has successfully been collected. Identify the three data combinations that can be viewed using the Maintain Supply Network Model Page. (Choose three.)

Customer Location and Carriers

Safety Stock and Subinventories

Sales Channel and Demand Class

Calendar and Master Organization

Supplier Site and Service Level

QUESTION 80
Identify two ways you can track performance against goals when defining measure goals. (Choose two.)

Specification

Value

Range

Aggregation

Quantity

Attribute