[Oct-2022] Juniper JN0-362 DUMPS WITH REAL EXAM QUESTIONS

2022 New SurePassExams JN0-362 PDF Recently Updated Questions

How to study the JN0-362 Exam

A solid foundation on Multiprotocol Label Switching (MPLS) is required. After beginner concepts such as MPLS forwarding and the structure of the MPLS header, you should learn into the configuration and operation of the two main label distribution protocols, RSVP and LDP. Give special emphasis to the central topics of traffic engineering and MPLS traffic protection, including fast reroute, link/node protection, and LDP loop-free alternate. Put into practice with a series of in-depth hands-on labs, which will allow candidate to gain experience in configuring and monitoring MPLS on Junos OS devices. Utilize Juniper Networks vMX Series devices using the Junos OS Release 16.1R3.10, but are also applicable to other MX Series devices.JN0-362 practice exams provides detailed resources and items on the JN0-362 exam. The JN0-362 exam dumps will help you identify the content and difficulty level of the questions and the practice Exams will make you familiar with the format and environment of an exam. You should refer this JN0-362 exam dumps carefully before attempting your actual exam.

2. Junos Service Provider Switching (JSPX)

Junos Service Provider Switching (JSPX) also runs for 2 days. However, it focuses on switching skills and the relevant concepts such as provider bridging, Ethernet Operation, Administration, and Maintenance, spanning-tree protocols, VLAN translation, virtual LANs (VLANs), and bridging. Success in this course requires familiarity with the Junos OS Release 18.1R1.9, Open Systems Interconnection (OSI), and TCP/IP. It’s important to note that this class is well-suited to all IT specialists who take pride in configuring or monitoring functional devices that run on the Junos OS. Also, exam-takers must be familiar with a set of Juniper products and solutions before enrolling in this training. This includes automation, switching, EX Series, Junos OS, and MX Series. When it comes to the content of such lessons, on the first day of your certification exam prep, you will be required to master the concepts of Ethernet Switching and Virtual LANs, Virtual Switches, and Provider Bridging. Of course, this is only possible after getting a sneak peek of the course through the introduction. That being said, the instructors will cover the following topics on the second day of this course:

• High Availability and Network Optimization;
• Troubleshooting and Monitoring.
• Ethernet OAM;
• Spanning-Tree Protocols;

NO.13 Click the Exhibit button.

Referring to the exhibit, which two statements are correct? (Choose two.)

 The router will install the 0.0.0.0/0 route into the routing table when no BGP prefixes are present

 The router will remove the 0.0.0.0/0 route from the routing table when no BGP prefixes are present

 The router will remove the 0.0.0.0/0 route from the routing table when any BGP prefixes are present

 The router will install the 0.0.0.0/0 route into the routing table when any BGP prefixes are present

NO.14 Click the Exhibit button.

Referring to the exhibit what are two reasons for the configuration stanza? (Choose two.)

 to reduce the risk of forwarding traffic through a stateless tunnel

 to mark the tunnel down after the hold-time expires

 to remove the tunnel interface from inet.0 after the hold-time expires

 to mark the tunnel up after the hold-time expires

NO.15 Click the Exhibit button. The policy shown in the exhibit has been configured and installed on your router.

What is the result of applying this policy?

 The 172.18.1.0/24 network will be redistributed into OSPF as an external route.

 The 172.18.1.0/24 network will be redistributed into OSPF as an internal route.

 The 172.18.1.0/32 network will be redistributed into OSPF as an external route.

 The 172.18.1.0/32 network will be redistributed into OSPF as an internal route.

NO.16 Router A receives two similar route advertisements from different BGP peers.What would cause a route to be selected in this scenario?

 having a lower MED value

 having a lower local preference

 learning a route from a peer with a higher peer ID

 learning a route from a peer with a higher IGP metric

NO.17 Which two statements describe operations performed by the encapsulating tunnel endpoint in an IP-IP tunnel? (Choose two.)

 It decrements the time-to-live (TTL) counter by one in the inner IP header

 It modifies the source and destination addresses in the inner IP header

 It adds an outer IP header with the destination address of the remote tunnel endpoint

 It creates and adds a new inner IP header with the remote destination device’s IP address

Explanation/Reference:

NO.18 Which statement is true when using VLANs in a bridge domain on an MX Series device?

 The VLAN tags of the received packet are always translated.

 Only outer VLAN tags can be normalized.

 The VLAN tag of the received packet must match the VLAN tags associated with one of the logical interfaces.

 Outer and inner VLAN tags always checked at egress.

NO.19 Click the Exhibit button. You have two routers connected over a Gigabit Ethernet link as shown in the exhibit It is required that an IS-IS adjacency be established without the need for a designated intermediate system (DIS)

Which configuration statement entered on both routers will achieve this goal?

 set interface ge-0/0/2 unit 0 family iso no-dis

 set interface ge-0/0/2 unit 0 family iso point-to-point

 set protocols isis interface ge-0/0/2.0 no-dis

 set protocols isis interface ge-0/0/2.0 point-to-point

NO.20 By default, the Junos OS advertises which address(es) in LDP forwarding equivalency class (FEC) messages?

 all router addresses

 all transit interfaces

 loopback address

 primary transit interface address

NO.21 Click the Exhibit button.

You are asked to configure OSPF for the network? Referring to the exhibit, how should Area 1 be configured?

 stub area

 totally stubby area

 not-so-stubby area

 backbone area

NO.22 You have been asked to provision a service provider’s network to accommodate Layer 3 VPNs as defined in RFC 4364.Which three tasks must be performed before the provider network is ready to carry VPN traffic? (Choose three.)

 All Juniper Networks PE routers must be configured with an appropriate router-ID unique to the VPN.

 All Juniper Networks PE routers must be configured with an appropriate route-target unique to the VPN.

 All Juniper Networks PE routers must be configured with a routing-instance of type forwarding.

 All Juniper Networks PE routers must be configured with a routing-instance of type vrf.

 All Juniper Networks PE routers must be configured with a routing-instance containing the CE- facing interface.

NO.23 Click the Exhibit button.

Referring to the exhibit, how many milliseconds must pass before the interface ge-0/0/1.0 is considered down?

 1200 ms

 900 ms

 1600 ms

 2400 ms

NO.24 Which standards-based election protocol facilities redundancy in a LAN environment by eliminating a single point failure through the use of master and backup routers?

 VRRP

 BFD

 graceful restart

 ISSU

NO.25 You are asked to design a Layer 2 VPN service between service provider networks that needs Ethernet transport capabilities. The VPN should support two or three endpoints. Which Layer 2 VPN technology should you propose?

 LDP-signaled VPLS

 BGP-signaled VPLS, using the RFC 4448 Layer 2 frame format

 LDP Layer 2 circuit, using the RFC 4448 Layer 2 frame format

 BGP Layer 2 VPN

NO.26 Which two statements reflect benefits of performing per-flow load balancing over per-packet load balancing? (Choose two.)

 All physical links in the network are used equally.

 Packets arrive at the destination in the order they were sent.

 Provides easier implementation of class of service policies.

 Allows the destination host to re-order packets and increase performance.

NO.27 Click the Exhibit button.

You configured R1 and R2 to form an OSPF adjacency, but the adjacency will not establish. Referring to the exhibit, which statement correctly identifies the problem?

 Hello and dead timers are not matching between R1 and R2

 R1 does not have a router ID defined

 R1 and R2 have the same router ID

 R2 has a wrong area configured

 Loading …

How much JN0-362 Exam Cost

The price of the JN0-362 exam is $350 US-

Latest JN0-362 Pass Guaranteed Exam Dumps Certification Sample Questions: https://www.surepassexams.com/JN0-362-exam-bootcamp.html

         

Related Links: myportal.utt.edu.tt myportal.utt.edu.tt myportal.utt.edu.tt myportal.utt.edu.tt myportal.utt.edu.tt myportal.utt.edu.tt