Pass Network Appliance NS0-162 PDF Dumps Recently Updated 61 Questions [Q28-Q47]

NEW QUESTION 28
Exhibit.
Miss—————–
The availability of the remote cluster in the peering relationship shows “Partial.” Referring to the exhibit, what is the reason for this status message?

The remote cluster does not have its cluster license applied properly.

The local cluster is unable to authenticate successfully to the remote cluster.

Some nodes In the local cluster are not able to contact some or all nodes in the remote cluster.

The Intercluster LIFs on the local cluster are unavailable and not able to communicate to the remote cluster.

NEW QUESTION 29
Click the Exhibit button.
The volumes shown in the exhibit, vol1 and vol2, are in the same AFF aggregate. You write the same large 100 GB file to both vol1 and vol2.
Based on the volume efficiency settings, which action occurs?

The files are deduplicated at the volume level.

The files are deduplicated at the SVM level by SVM1.

The files are deduplicated at the aggregate level.

The files are queued for a background deduplication schedule.

NEW QUESTION 30
Click the Exhibit button.
Your ONTAP 9.7 cluster failed a security audit on the management control plane. Your network security team asked you to allow only cluster1 and SVM1 management on the 192.168.1.0/24 subnet.
In this scenario, where do you apply the default-management service policy shown in the exhibit?

port

firewall

LIF

DNS

NEW QUESTION 31
You want to configure Active Directory domain controller access for NetApp ONTAP cluster administration. In this scenario, which two actions would accomplish this task? (Choose two.)

Configure an authentication tunnel through an admin SVM.

Use the vservar active-directory create command to create a computer account on the domain for a non-CIFS SVM.

Use the vserver active-directory create command to create a computer account on the domain for a CIFS SVM.

Configure an authentication tunnel through an existing CIFS SVM.

NEW QUESTION 32
You created a new SVM with two NFS data volumes. You have a Linux host on the same subnet as the SVM that is able to NFS mount, however a Linux host on a different subnet is not able to NFS mount.
You confirmed that the export policy rules are correct.
In this scenario, which configuration will solve the mount failure?

NTP is not configured on the SVM.

The NFS server is not configured on the SVM.

The SvM default network route is missing.

NFS auditing is not enabled on the SVM.

NEW QUESTION 33
You ate attempting to establish a SnapMlrror relationship between your ONTAP cluster (AcmeClusOl) and a partner company’s ONTAP cluster (WidgetsClusOl). The clusters are unable to establish a peering relationship. You perform a packet capture on WldgetsClusOl and do not see any packets from AcmeClusOl. You also discover that the IP subnet that Is used for WidgetsClusOl’s intercluster LIFs overlaps with a local subnet at your company.
In this scenario, which feature would enable AcmeClusOl and WidgetsClusOl to peer with each other?

VLANs

broadcast domains

IPspaces

ONTAP subnets

NEW QUESTION 34
Exhibit.

A Linux host with the 10.0.1.24 IP address is unable to mount the VOL_A volume using NFSv3.
Referring to the exhibit, what is the problem?

The host IP address does not match the export policy rule.

The volume is in read-only.

The volume is not mounted In the namespace.

The logical Interface does not allow the NFSv3 protocol.

NEW QUESTION 35
SnapMirror Business Continuity (SM-BC) relies on a component to trigger an automatic unplanned failover (AUFO). In this scenario, what is this component?

ONTAP Deploy

Tiebreaker software

ONTAP Mediator

Cloud Manager

NEW QUESTION 36
A customer requests that all new data volumes created for an SVM must be hosted on a dedicated SSD aggregate.
How do you accomplish this task?

Relocate all non-SSD aggregates from the controller.

Edit the SVM and select only the SSD aggregate using the delegate volume creation option.

Create a SnapMirror policy to replicate any volumes created on the non-SSD aggregates to the SSD aggregate.

Move the SVM root volume to the SSD aggregate.

NEW QUESTION 37
You want to prepare your ONTAP cluster and your ESXI cluster to connect NFS datastores over a 10-GbE network using Jumbo frames. In this scenario, which three configurations would accomplish this task?
(Choose three.)

Enable jumbo frames with an MTU of 9000 for your ESXi hosts.

Enable jumbo frames with an MTU of 9216 for your switches.

Enable Jumbo frames with an MTU of 1500 for your ESXI hosts.

Enable Jumbo frames with an MTU of 1500 for your ONTAP cluster.

Enable Jumbo frames with an MTU of 9000 for your ONTAP cluster.

NEW QUESTION 38
You have a new ONTAP 9.7 2-node AFF A300 cluster with 2x DS224C full shelves of 3.8 TB encrypted SSDs.
In this scenario, which statement matches the factory disk-ownership setting?

All even-numbered drives on each shelf are assigned to one node, and all odd-numbered drives on each shelf are assigned to the partner node.

Disk ownership is not assigned by the factory,

All drives on shelf 1 are assigned to one node, and all drives on shelf 2 are assigned to the partner node.

Drives 0-11 on each shelf are assigned to one node, and drives 12-23 on each shelf are assigned to the partner node.

NEW QUESTION 39
Exhibit.

You have a NetApp AFF A400 HA pair with Fabric Pool enabled on all data using the snapshot-only policy. Users are reporting slow restores when they recover files with the Windows Previous Versions tab.
Referring to the exhibit, what is the highest latency seen on restore?

10500

10021

9591

7889

NEW QUESTION 40
Click the Exhibit button.
You are planning to present storage to your servers from your AFF system using the FC protocol. You have a pair of Fc switches to ensure connectivity and you have decided to use WWPN zoning.
Referring to the exhibit, which two WWPNs do you use for your configuration? (Choose two.)

fc-1 WWPN

fc-2 WWPN

0d WWPN

0c WWPN

NEW QUESTION 41
You are asked by your network engineering team to make sure that your NetApp cluster Is configured to run LACP on Its network ports. Which network component satisfies this request?

VLAN

Interface group

broadcast domain

failover group

NEW QUESTION 42
Exhibit.

You are caching on-premises ONTAP volumes into the cloud with Cloud Volumes ONTAP as shown in the exhibit. In this scenario, which two protocols are supported? (Choose two.)

SMB

NVMe

ISCSI

NFS

NEW QUESTION 43
Exhibit.

Referring to the exhibit, what would cause a customer to have an Issue with SVM eplc_fcp when mapping a namespace to a host?

FC has not been licensed on the cluster.

NVMe Is not configured for the SVM.

FC switch zoning has not been done correctly.

NVMe is not licensed on the cluster.

NEW QUESTION 44
You want to enable a management LIF to restrict NTP to the 192.168.1.0/24 subnet.
In this scenario, which two actions are required to accomplish this task? (Choose two.)

Create a failover policy.

Assign a policy to the management LIF.

Assign a policy to the NTP server.

Create a firewall policy.

NEW QUESTION 45
Exhibit.

You have a NetApp AFF A400 HA pair with Fabric Pool enabled on all data using the snapshot-only policy.
Users are reporting slow restores when they recover files with the Windows Previous Versions tab.
Referring to the exhibit, what is the highest latency seen on restore?

10500

10021

9591

7889

NEW QUESTION 46
After deploying an ONTAP 9.8 cluster, you want to disable the unused Ethernet ports. In this scenario, which two methods would accomplish this task? (Choose two.)

Use ONTAP System Manager.

Use the command line interface.

Use Active IQ Config Advisor.

Use Active IQ Unified Manager.

NEW QUESTION 47
You need to Increase the number of files that can be created In a volume. Which two methods enable you to achieve this goal? (Choose two.)

Increase the number of files permitted on the volume.

Set the space guarantee to ‘volume”.

Set the fractional reserve to “0”.

Increase the size of the volume.

Leave a Reply Cancel reply